Preventive measures for stone plastic elevator door pocket

1、線角不直、縫格不勻、不直：主要是施工前沒有認真按照圖紙尺寸，核對結構施工的實際尺寸，以及分段分塊彈線不細、拉線不直和吊線校正檢查不勤等原因所造成。

1. The line angle is not straight, the joint grid is uneven, and it is not straight: it is mainly caused by the fact that the actual size of the structure construction is not checked carefully according to the drawing size before construction, as well as the reasons such as the line snapping in sections and blocks is not thin, the stay wire is not straight, and the suspension wire is not corrected and checked frequently.

2、石塑電梯門套外飾UV裝飾板材面層顏色不一：主要原因花色不是同種，施工時沒有進行試拼和認真的挑選花色型號。

2. The exterior decoration of stone plastic elevator door pocket UV decorative plate surface has different colors: the main reason is that the design and color are not the same, and there is no trial assembly and careful selection of design and color models during construction.

3、電梯套打膠、嵌縫不細：立面凹凸變化的節(jié)點、UV裝飾板材和石塑線條交接處、窗臺與墻面等交接處。首先操作人員要認真堅持有人檢查與無人檢查一個樣，其次管理人員要一步一個腳印，每一塊完成后都要進行認真仔細的檢查驗收。

3. The elevator sleeve is not well glued and caulked: the nodes with concave convex changes in the facade, the junction of UV decorative plates and stone plastic lines, and the junction of windowsill and wall. First of all, the operators should carefully adhere to the same principle that the inspection by someone is the same as that by no one. Secondly, the management personnel should make a step-by-step inspection and acceptance after each piece is completed.

4、電梯門套墻面臟、斜視有膠痕：其主要原因是多方面的，一是操作人員要養(yǎng)成隨干隨清擦的良好習慣；二是操作工藝造成，即自下而上的板材安裝方法和工藝直接給成品保護帶來一定的難度，高度越高其難度就越大；三是要加強成品保護的管理和教育工作；四是竣工前要自上而下的進行完全的清擦。

4. The elevator door pocket wall is dirty and squinted with glue marks: the main reasons are various. First, the operators should develop the good habit of cleaning as soon as they dry; Second, it is caused by the operation process, that is, the bottom-up plate installation method and process directly bring certain difficulty to the finished product protection, and the higher the height, the greater the difficulty; Third, we should strengthen the management and education of finished product protection; Fourth, complete cleaning should be carried out from top to bottom before completion.

以上就是為大家介紹的有關裝飾線板的詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯(lián)系我們.我們將以的態(tài)度,為您提供服務http://www.kulg.cn

The above is a detailed introduction to the decorative line board, which I hope will be helpful to you If you have any questions, please contact us We will provide you with professional service http://www.kulg.cn